Johnson Window Films Dealer Resource Center

JWF, Machines

Rough-Cut Machines

The Film Star JrThe use of a special cutting machine to make rough-cut patterns can be very helpful because it can give you the ability to cut a straight line on all sides. This can minimize waste and save you time on your final trims

There are a few different machines available in the marketplace that can load the film and hold it straight and true. While the machine holds the film, it also allows you to pull the length desired and trim down the width with built in knifes that can adjust to size accordingly.

When using one of these machines, you can set it directly in front of the window you are about to install and pull out the film. As the film is being pulled, the liner will release and you'll be able to trim the film down to size. Then you just step on a pedal to cut the film off of the roll.

This film handler is great Makes the job easier.

© 2009-2021 Johnson Window Films, Inc. Carson, California USA